KBLI 31021

Plastic Furniture Manufacturing

Industri Furnitur dari Plastik

🏭 Section C — Manufacturing

In Bali: open to a PT PMA

✅Open· 100% ForeignLow RiskRenumberedConditional in Bali — depends on declared scope· medium conf.OSS-verified · KBLI 2025

Plastic Furniture Manufacturing With a Scope-Dependent Bali Gate

This activity covers plastic-led furniture production, nationally open to PMA ownership, with Bali registration depending on the exact OSS risk scope declared.

Nationally this activity is fully foreign-open, but in Bali the decisive question is the exact OSS risk scope declared.

What Changed

KBLI 2020→2025 mapping: code renumbered.

What You Need

Nationally, this activity is fully open to 100% foreign ownership (PMA). In Bali, the island-wide moratorium (in force since 13 May 2026) halts PMA registrations for Low and Medium-Low risk lines, and some scopes of this KBLI fall in that band — but at least one large-scale (Besar) scope carries a higher risk class, so the code remains registrable as a PMA in Bali on that scope.

Who This Is For

A foreign entrepreneur with production experience who wants to set up a plastic furniture factory in Indonesia, but currently must look outside Bali or wait for the moratorium to lift.

Licensing Overview

Risk LevelRendah

License TypeNIB

Foreign Ownership100% Open

ProcessingInstant

2020 → 2025

Previous codes (KBLI 2020): 31003— PP28 uses KBLI 2020 code 31003 (Industri Furnitur Dari Plastik...). Match: 100%

BPS crosswalk

Official BPS 2020 → 2025 crosswalk ancestors: 28261, 31003

Source: the BPS 2020↔2025 conversion table, mechanically extracted and acceptance-gate verified. It shows which 2020 codes map to this 2025 code — provenance only, not a licensing claim: the regulatory regime of these predecessor codes has not been adjudicated as transferring.

Sources & Verification

Each data layer below traces to a government source with its KBLI vintage — or is declared as a gap. Nothing in these layers is silently filled in.

Activity definition

BPS Peraturan 7/2025 + PP 28/2025VerifiedKBLI 2025

Title and scope as defined by the KBLI-2025 classification.

locator: OSS_RBA_2025_id_version_fff4053d

Risk & licensing

OSS RBA risk scope (ruang lingkup)VerifiedKBLI 2025

Risk category and licensing rows are KBLI-2025-native from the OSS Risk-Based Approach catalog.

locator: OSS_RBA_resiko_2025

Foreign ownership (PMA)

Perpres 10/2021, 49/2021Audit pendingKBLI 2020

The investment-list annexes predate KBLI 2025; the per-code crosswalk audit of this layer is in progress. The value shown is the annex text, disclosed with its vintage.

Bali status

Bali province blocks ALL Low + Medium-Low risk KBLI for PMA (island-wide, permanent) (effective 2026-05-13)Audit pending2026 overlay

Conservative posture derived from the risk tier · confidence MEDIUM.

Dataset last updated 2026-07-26 · KBLI 2020 and KBLI 2025 reuse code numbers for different activities — cross-vintage rows are labeled, never merged silently.

Common Questions

Can foreigners operate a plastic furniture manufacturing business in Indonesia?

Yes. KBLI 31021 (Industri Furnitur dari Plastik) is TERBUKA — open to 100% foreign ownership via PT PMA. No local Indonesian partner required. (Source: Perpres 10/2021 as amended by Perpres 49/2021 — the investment-list annexes predate KBLI 2025; per-code crosswalk audit in progress.)

What license is required for KBLI 31021?

KBLI 31021 has a Rendah risk classification. Required license: NIB. Processing time: Otomatis.

What is KBLI 31021?

KBLI 31021 is the Indonesian business classification code for "Industri Furnitur dari Plastik" (Plastic Furniture Manufacturing). It falls under Section C of KBLI 2025, the Indonesian Standard Industrial Classification updated by BPS (Regulation 7/2025). The June 2026 KBLI 2025 transition window has closed; operators should verify the code's current OSS/NIB treatment before relying on it for licensing, reporting, or amendments.

How did KBLI 31021 change from KBLI 2020 to 2025?

KBLI 31021 was mapped from previous code 31003 (KBLI 2020). PP28 uses KBLI 2020 code 31003 (Industri Furnitur Dari Plastik...). Match: 100% The code was renumbered but the business activity scope is essentially unchanged. The June 2026 KBLI 2025 transition window has closed. If an NIB still relies on legacy KBLI 2020 mappings, treat the migration as overdue and verify/remediate the OSS record before new license applications, amendments, LKPM, import approvals, or investor/worker sponsorship.

Related Codes

31022Section C

Metal Furniture Manufacturing

Industri Furnitur dari Logam

→

Conditional in Bali — depends on declared scope✅Open· 100% ForeignLow Risk

31012Section C★

Rattan & Bamboo Furniture Manufacturing

Industri Furnitur dari Rotan dan Bambu

→

Blocked in Bali (risk-class moratorium)✅Open· 100% nat'l · blocked in BaliLow Risk

31029Section C

Furniture Manufacturing from Other Materials

Industri Furnitur dari Bahan Lainnya Ytdl

→

Blocked in Bali (risk-class moratorium)✅Open· 100% nat'l · blocked in BaliLow Risk

31011Section C★

Wooden Furniture Manufacturing

Industri Furnitur dari Kayu

→

Blocked in Bali (risk-class moratorium)✅Open· 100% nat'l · blocked in BaliLow Risk

32111Section C★

Gemstone Cutting, Polishing & Enhancement

Industri Permata

→

Registrable in Bali✅Open· 100% ForeignMedium-Low Risk

30990Section C

Other Transport Equipment Manufacturing

Industri Alat Angkutan Lainnya Ytdl

→

Registrable in Bali✅Open· 100% ForeignLow Risk

🏢

Ready to register this business?

Bali Zero handles PT PMA setup, KBLI registration, NIB, and all licensing for KBLI 31021.

PT PMA Setup

IDR 20.000.000

Company registration, KBLI, NIB, domicile

Virtual Office

IDR 5.000.000

Legal address for your PT PMA in Bali

5,000+ companies registered since 2020

Get started on WhatsApp

KBLI 31021

Plastic Furniture Manufacturing

Industri Furnitur dari Plastik

🏭 Section C — Manufacturing

In Bali: open to a PT PMA

✅Open· 100% ForeignLow RiskRenumberedConditional in Bali — depends on declared scope· medium conf.OSS-verified · KBLI 2025

Plastic Furniture Manufacturing With a Scope-Dependent Bali Gate

This activity covers plastic-led furniture production, nationally open to PMA ownership, with Bali registration depending on the exact OSS risk scope declared.

Nationally this activity is fully foreign-open, but in Bali the decisive question is the exact OSS risk scope declared.

What Changed

KBLI 2020→2025 mapping: code renumbered.

What You Need

Who This Is For

A foreign entrepreneur with production experience who wants to set up a plastic furniture factory in Indonesia, but currently must look outside Bali or wait for the moratorium to lift.

Licensing Overview

Risk LevelRendah

License TypeNIB

Foreign Ownership100% Open

ProcessingInstant

2020 → 2025

Previous codes (KBLI 2020): 31003— PP28 uses KBLI 2020 code 31003 (Industri Furnitur Dari Plastik...). Match: 100%

BPS crosswalk

Official BPS 2020 → 2025 crosswalk ancestors: 28261, 31003

Sources & Verification

Each data layer below traces to a government source with its KBLI vintage — or is declared as a gap. Nothing in these layers is silently filled in.

Activity definition

BPS Peraturan 7/2025 + PP 28/2025VerifiedKBLI 2025

Title and scope as defined by the KBLI-2025 classification.

locator: OSS_RBA_2025_id_version_fff4053d

Risk & licensing

OSS RBA risk scope (ruang lingkup)VerifiedKBLI 2025

Risk category and licensing rows are KBLI-2025-native from the OSS Risk-Based Approach catalog.

locator: OSS_RBA_resiko_2025

Foreign ownership (PMA)

Perpres 10/2021, 49/2021Audit pendingKBLI 2020

The investment-list annexes predate KBLI 2025; the per-code crosswalk audit of this layer is in progress. The value shown is the annex text, disclosed with its vintage.

Bali status

Bali province blocks ALL Low + Medium-Low risk KBLI for PMA (island-wide, permanent) (effective 2026-05-13)Audit pending2026 overlay

Conservative posture derived from the risk tier · confidence MEDIUM.

Dataset last updated 2026-07-26 · KBLI 2020 and KBLI 2025 reuse code numbers for different activities — cross-vintage rows are labeled, never merged silently.

Common Questions

Can foreigners operate a plastic furniture manufacturing business in Indonesia?

What license is required for KBLI 31021?

KBLI 31021 has a Rendah risk classification. Required license: NIB. Processing time: Otomatis.

What is KBLI 31021?

How did KBLI 31021 change from KBLI 2020 to 2025?

Related Codes

31022Section C

Metal Furniture Manufacturing

Industri Furnitur dari Logam

→

Conditional in Bali — depends on declared scope✅Open· 100% ForeignLow Risk

31012Section C★

Rattan & Bamboo Furniture Manufacturing

Industri Furnitur dari Rotan dan Bambu

→

Blocked in Bali (risk-class moratorium)✅Open· 100% nat'l · blocked in BaliLow Risk

31029Section C

Furniture Manufacturing from Other Materials

Industri Furnitur dari Bahan Lainnya Ytdl

→

Blocked in Bali (risk-class moratorium)✅Open· 100% nat'l · blocked in BaliLow Risk

31011Section C★

Wooden Furniture Manufacturing

Industri Furnitur dari Kayu

→

Blocked in Bali (risk-class moratorium)✅Open· 100% nat'l · blocked in BaliLow Risk

32111Section C★

Gemstone Cutting, Polishing & Enhancement

Industri Permata

→

Registrable in Bali✅Open· 100% ForeignMedium-Low Risk

30990Section C

Other Transport Equipment Manufacturing

Industri Alat Angkutan Lainnya Ytdl

→

Registrable in Bali✅Open· 100% ForeignLow Risk

🏢

Ready to register this business?

Bali Zero handles PT PMA setup, KBLI registration, NIB, and all licensing for KBLI 31021.

PT PMA Setup

IDR 20.000.000

Company registration, KBLI, NIB, domicile

Virtual Office

IDR 5.000.000

Legal address for your PT PMA in Bali

5,000+ companies registered since 2020

Get started on WhatsApp

Zantara AIOSS Intelligence System

Context31021

Ask me anything about KBLI 31021 — Plastic Furniture Manufacturing. Licensing, PMA rules, what changed in 2025, or how it works in Bali.