KBLI 20131

Synthetic Resin & Plastic Raw Material Manufacturing

Industri Damar Buatan (resin Sintetis) dan Bahan Baku Plastik

🏭 Section C — Manufacturing

In Bali: open to a PT PMA

✅Open· 100% ForeignMedium-Low RiskDirect MatchRegistrable in Bali· medium conf.OSS-verified · KBLI 2025

Synthetic Resin and Virgin Plastic Feedstock, Without the Bali Trap

KBLI 20131 covers the making of synthetic resins and virgin plastic raw materials, open nationally to PMA and not blocked for Bali in the record.

The honest conclusion is clean: KBLI 20131 is foreign-open nationally, and the slim record does not show a Bali PMA moratorium block for it today.

What Changed

Direct 1:1 match from KBLI 2020 — code and scope unchanged.

What You Need

Nationally, this activity is 100% open to foreign ownership (PMA). In Bali, the island-wide moratorium (in force since 13 May 2026) only halts PMA registrations for Low and Medium-Low risk lines — this KBLI's large-scale (Besar) risk class is higher, so it is not caught: PMA registration in Bali remains possible.

Who This Is For

Foreign chemical or plastics manufacturers looking to produce raw synthetic resins and plastic pellets, but they must set up outside Bali.

Licensing Overview

Risk LevelMenengah Rendah

License TypeNIB + Sertifikat Standar

Foreign Ownership100% Open

ProcessingInstant

2020 → 2025

Previous codes (KBLI 2020): 20131

BPS crosswalk

Official BPS 2020 → 2025 crosswalk ancestors: 20115, 20131

Source: the BPS 2020↔2025 conversion table, mechanically extracted and acceptance-gate verified. It shows which 2020 codes map to this 2025 code — provenance only, not a licensing claim: the regulatory regime of these predecessor codes has not been adjudicated as transferring.

Sources & Verification

Each data layer below traces to a government source with its KBLI vintage — or is declared as a gap. Nothing in these layers is silently filled in.

Activity definition

BPS Peraturan 7/2025 + PP 28/2025VerifiedKBLI 2025

Title and scope as defined by the KBLI-2025 classification.

locator: OSS_RBA_2025_id_version_fff4053d

Risk & licensing

OSS RBA risk scope (ruang lingkup)VerifiedKBLI 2025

Risk category and licensing rows are KBLI-2025-native from the OSS Risk-Based Approach catalog.

locator: OSS_RBA_resiko_2025

Foreign ownership (PMA)

Perpres 10/2021, 49/2021Audit pendingKBLI 2020

The investment-list annexes predate KBLI 2025; the per-code crosswalk audit of this layer is in progress. The value shown is the annex text, disclosed with its vintage.

Bali status

Bali province blocks ALL Low + Medium-Low risk KBLI for PMA (island-wide, permanent) (effective 2026-05-13)Audit pending2026 overlay

Conservative posture derived from the risk tier · confidence MEDIUM.

Dataset last updated 2026-07-26 · KBLI 2020 and KBLI 2025 reuse code numbers for different activities — cross-vintage rows are labeled, never merged silently.

Common Questions

Can foreigners operate a synthetic resin & plastic raw material manufacturing business in Indonesia?

Yes. KBLI 20131 (Industri Damar Buatan (resin Sintetis) dan Bahan Baku Plastik) is TERBUKA — open to 100% foreign ownership via PT PMA. No local Indonesian partner required. (Source: Perpres 10/2021 as amended by Perpres 49/2021 — the investment-list annexes predate KBLI 2025; per-code crosswalk audit in progress.)

What license is required for KBLI 20131?

KBLI 20131 has a Menengah Rendah risk classification. Required license: NIB + Sertifikat Standar. Processing time: Otomatis.

What is KBLI 20131?

KBLI 20131 is the Indonesian business classification code for "Industri Damar Buatan (resin Sintetis) dan Bahan Baku Plastik" (Synthetic Resin & Plastic Raw Material Manufacturing). It falls under Section C of KBLI 2025, the Indonesian Standard Industrial Classification updated by BPS (Regulation 7/2025). The June 2026 KBLI 2025 transition window has closed; operators should verify the code's current OSS/NIB treatment before relying on it for licensing, reporting, or amendments.

How did KBLI 20131 change from KBLI 2020 to 2025?

KBLI 20131 was mapped from previous code 20131 (KBLI 2020). This is a direct match — the code number and scope remained the same. The June 2026 KBLI 2025 transition window has closed. If an NIB still relies on legacy KBLI 2020 mappings, treat the migration as overdue and verify/remediate the OSS record before new license applications, amendments, LKPM, import approvals, or investor/worker sponsorship.

Related Codes

20132Section C

Synthetic Rubber Manufacturing

Industri Karet Buatan

→

Registrable in Bali✅Open· 100% ForeignHigh Risk

20125Section C

Biostimulant Manufacturing

Industri Biostimulan

→

Registrable in Bali✅Open· 100% ForeignMedium-Low Risk

20124Section C

Organic Fertilizer & Growing Media

Industri Pupuk Organik, Pupuk Hayati, dan Media Tanam

→

Conditional in Bali — depends on declared scope✅Open· 100% ForeignMedium-Low Risk

20123Section C

Micronutrient Fertilizer Manufacturing

Industri Pupuk Hara Mikro

→

Blocked in Bali (risk-class moratorium)✅Open· 100% nat'l · blocked in BaliMedium-Low Risk

20122Section C

Other Primary Macronutrient Fertilizer Manufacturing

Industri Pupuk Hara Makro Primer Lainnya

→

Conditional in Bali — depends on declared scope✅Open· 100% ForeignMedium-Low Risk

20121Section C

Nitrogen Compounds & NPK Fertilizer Manufacturing

Industri Senyawa Nitrogen; Pupuk Nitrogen, Fosfat, dan Kalium

→

Registrable in Bali✅Open· 100% ForeignMedium-Low Risk

🏢

Ready to register this business?

Bali Zero handles PT PMA setup, KBLI registration, NIB, and all licensing for KBLI 20131.

PT PMA Setup

IDR 20.000.000

Company registration, KBLI, NIB, domicile

Virtual Office

IDR 5.000.000

Legal address for your PT PMA in Bali

5,000+ companies registered since 2020

Get started on WhatsApp

KBLI 20131

Synthetic Resin & Plastic Raw Material Manufacturing

Industri Damar Buatan (resin Sintetis) dan Bahan Baku Plastik

🏭 Section C — Manufacturing

In Bali: open to a PT PMA

✅Open· 100% ForeignMedium-Low RiskDirect MatchRegistrable in Bali· medium conf.OSS-verified · KBLI 2025

Synthetic Resin and Virgin Plastic Feedstock, Without the Bali Trap

KBLI 20131 covers the making of synthetic resins and virgin plastic raw materials, open nationally to PMA and not blocked for Bali in the record.

The honest conclusion is clean: KBLI 20131 is foreign-open nationally, and the slim record does not show a Bali PMA moratorium block for it today.

What Changed

Direct 1:1 match from KBLI 2020 — code and scope unchanged.

What You Need

Who This Is For

Foreign chemical or plastics manufacturers looking to produce raw synthetic resins and plastic pellets, but they must set up outside Bali.

Licensing Overview

Risk LevelMenengah Rendah

License TypeNIB + Sertifikat Standar

Foreign Ownership100% Open

ProcessingInstant

2020 → 2025

Previous codes (KBLI 2020): 20131

BPS crosswalk

Official BPS 2020 → 2025 crosswalk ancestors: 20115, 20131

Sources & Verification

Each data layer below traces to a government source with its KBLI vintage — or is declared as a gap. Nothing in these layers is silently filled in.

Activity definition

BPS Peraturan 7/2025 + PP 28/2025VerifiedKBLI 2025

Title and scope as defined by the KBLI-2025 classification.

locator: OSS_RBA_2025_id_version_fff4053d

Risk & licensing

OSS RBA risk scope (ruang lingkup)VerifiedKBLI 2025

Risk category and licensing rows are KBLI-2025-native from the OSS Risk-Based Approach catalog.

locator: OSS_RBA_resiko_2025

Foreign ownership (PMA)

Perpres 10/2021, 49/2021Audit pendingKBLI 2020

The investment-list annexes predate KBLI 2025; the per-code crosswalk audit of this layer is in progress. The value shown is the annex text, disclosed with its vintage.

Bali status

Bali province blocks ALL Low + Medium-Low risk KBLI for PMA (island-wide, permanent) (effective 2026-05-13)Audit pending2026 overlay

Conservative posture derived from the risk tier · confidence MEDIUM.

Dataset last updated 2026-07-26 · KBLI 2020 and KBLI 2025 reuse code numbers for different activities — cross-vintage rows are labeled, never merged silently.

Common Questions

Can foreigners operate a synthetic resin & plastic raw material manufacturing business in Indonesia?

What license is required for KBLI 20131?

KBLI 20131 has a Menengah Rendah risk classification. Required license: NIB + Sertifikat Standar. Processing time: Otomatis.

What is KBLI 20131?

How did KBLI 20131 change from KBLI 2020 to 2025?

Related Codes

20132Section C

Synthetic Rubber Manufacturing

Industri Karet Buatan

→

Registrable in Bali✅Open· 100% ForeignHigh Risk

20125Section C

Biostimulant Manufacturing

Industri Biostimulan

→

Registrable in Bali✅Open· 100% ForeignMedium-Low Risk

20124Section C

Organic Fertilizer & Growing Media

Industri Pupuk Organik, Pupuk Hayati, dan Media Tanam

→

Conditional in Bali — depends on declared scope✅Open· 100% ForeignMedium-Low Risk

20123Section C

Micronutrient Fertilizer Manufacturing

Industri Pupuk Hara Mikro

→

Blocked in Bali (risk-class moratorium)✅Open· 100% nat'l · blocked in BaliMedium-Low Risk

20122Section C

Other Primary Macronutrient Fertilizer Manufacturing

Industri Pupuk Hara Makro Primer Lainnya

→

Conditional in Bali — depends on declared scope✅Open· 100% ForeignMedium-Low Risk

20121Section C

Nitrogen Compounds & NPK Fertilizer Manufacturing

Industri Senyawa Nitrogen; Pupuk Nitrogen, Fosfat, dan Kalium

→

Registrable in Bali✅Open· 100% ForeignMedium-Low Risk

🏢

Ready to register this business?

Bali Zero handles PT PMA setup, KBLI registration, NIB, and all licensing for KBLI 20131.

PT PMA Setup

IDR 20.000.000

Company registration, KBLI, NIB, domicile

Virtual Office

IDR 5.000.000

Legal address for your PT PMA in Bali

5,000+ companies registered since 2020

Get started on WhatsApp

Zantara AIOSS Intelligence System

Context20131

Ask me anything about KBLI 20131 — Synthetic Resin & Plastic Raw Material Manufacturing. Licensing, PMA rules, what changed in 2025, or how it works in Bali.