KBLI 28140

Bearing & Gear Transmission Manufacturing

Industri Bearing, Roda Gigi, dan Elemen Penggerak Mesin

🏭 Section C — Manufacturing

In Bali: a PT PMA cannot register this code

National procedure — does not apply to a PT PMA in Bali

In Bali this activity is blocked for a PT PMA under the 13 May 2026 moratorium. The national procedure below applies only to non-PMA operators.

✅Open· 100% nat'l · blocked in BaliLow RiskDirect MatchBlocked in Bali (risk-class moratorium)· medium conf.OSS-verified · KBLI 2025

Precision Machinery, Open Nationally but Blocked in Bali

KBLI 28140 covers the industrial making of bearings, gears, clutches and mechanical transmission components, with a clear national opening and a hard Bali stop for PMA registration.

KBLI 28140 is nationally open to full foreign ownership, but the Bali record turns that opening into a hard local stop for PMA registration.

What Changed

Direct 1:1 match from KBLI 2020 — code and scope unchanged.

What You Need

Nationally, this activity is 100% open to foreign ownership (PMA). However, in Bali it is currently blocked for new PMA companies because it falls under the low/medium-low risk classification, which is subject to a government moratorium on foreign registration since 13 May 2026. A local-penanam modal dalam negeri (PMDN) company may still be possible, but a foreign-owned entity cannot be licensed for this KBLI in Bali right now.

Who This Is For

A foreign entrepreneur in precision mechanical component manufacturing who wants to produce bearings, gears, or transmission elements—but must currently look outside Bali or wait until the moratorium lifts if set on a Bali location.

Licensing Overview

Risk LevelRendah

License TypeNIB

Foreign Ownership100% Open

ProcessingInstant

2020 → 2025

Previous codes (KBLI 2020): 28140

BPS crosswalk

Official BPS 2020 → 2025 crosswalk ancestors: 28140

Source: the BPS 2020↔2025 conversion table, mechanically extracted and acceptance-gate verified. It shows which 2020 codes map to this 2025 code — provenance only, not a licensing claim: the regulatory regime of these predecessor codes has not been adjudicated as transferring.

Sources & Verification

Each data layer below traces to a government source with its KBLI vintage — or is declared as a gap. Nothing in these layers is silently filled in.

Activity definition

BPS Peraturan 7/2025 + PP 28/2025VerifiedKBLI 2025

Title and scope as defined by the KBLI-2025 classification.

locator: OSS_RBA_2025_id_version_fff4053d

Risk & licensing

OSS RBA risk scope (ruang lingkup)VerifiedKBLI 2025

Risk category and licensing rows are KBLI-2025-native from the OSS Risk-Based Approach catalog.

locator: OSS_RBA_resiko_2025

Foreign ownership (PMA)

Perpres 10/2021, 49/2021Audit pendingKBLI 2020

The investment-list annexes predate KBLI 2025; the per-code crosswalk audit of this layer is in progress. The value shown is the annex text, disclosed with its vintage.

Bali status

Bali province blocks ALL Low + Medium-Low risk KBLI for PMA (island-wide, permanent) (effective 2026-05-13)Audit pending2026 overlay

Conservative posture derived from the risk tier · confidence MEDIUM.

Dataset last updated 2026-07-26 · KBLI 2020 and KBLI 2025 reuse code numbers for different activities — cross-vintage rows are labeled, never merged silently.

Common Questions

Can foreigners operate a bearing & gear transmission manufacturing business in Indonesia?

Nationally yes — but NOT in Bali. KBLI 28140 (Industri Bearing, Roda Gigi, dan Elemen Penggerak Mesin) is TERBUKA (100% foreign ownership) at the national level, but in Bali it is blocked for a PT PMA under the 13 May 2026 moratorium. OSS risk at scale Besar is Rendah/Menengah-Rendah on every scope → blocked by Bali moratorium 13 May 2026 Outside Bali it is open to a PT PMA with no local partner required. (Source: Perpres 10/2021 as amended by Perpres 49/2021 — the investment-list annexes predate KBLI 2025; per-code crosswalk audit in progress.)

What license is required for KBLI 28140?

KBLI 28140 has a Rendah risk classification. Required license: NIB. Processing time: Otomatis.

What is KBLI 28140?

KBLI 28140 is the Indonesian business classification code for "Industri Bearing, Roda Gigi, dan Elemen Penggerak Mesin" (Bearing & Gear Transmission Manufacturing). It falls under Section C of KBLI 2025, the Indonesian Standard Industrial Classification updated by BPS (Regulation 7/2025). The June 2026 KBLI 2025 transition window has closed; operators should verify the code's current OSS/NIB treatment before relying on it for licensing, reporting, or amendments.

How did KBLI 28140 change from KBLI 2020 to 2025?

KBLI 28140 was mapped from previous code 28140 (KBLI 2020). This is a direct match — the code number and scope remained the same. The June 2026 KBLI 2025 transition window has closed. If an NIB still relies on legacy KBLI 2020 mappings, treat the migration as overdue and verify/remediate the OSS record before new license applications, amendments, LKPM, import approvals, or investor/worker sponsorship.